Safe Creeper
Current version: Safe Creeper 1.5.3.1 Beta for Minecraft 1.9.2
| Installation | Basics | Add-ons and Support |
| Downloads | Commands | Supported Plugins |
| Installation | Permissions | Add-ons |
| Config | ||
| More | Development | Support |
| Bugs & Issues | API | Donate |
| Changelog | Source | |
| Statics | ||
| What is Safe Creeper |
|---|
Control creepers, Withers, EnderDragons, Enderman, TNT, Fireballs and a lot more!
With Safe Creeper you can control creeper explosions and other things like, fireballs, TNT, Enderman and a lot of other things, you can set if a creeper explosions destroys blocks. You can set if Zombie's can break down doors. You can also set a lot of other things, the possibilities are almost endless! A few other examples are that you can set up if players are able to use TNT blocks, if creepers will explode above the surface and underneath they wont, set if Enderman can place and break blocks, even if they can clone blocks, explosion sounds, smoke effects and a lot of more things. The plugins is fully configurable and it has multi world support. This is a must have for most server administrators.
| Example Video |
|---|
This is an video witch explains the config file system of an older version of Safe Creeper, it should work very similair with the current version. This video also shows you some features from Safe Creeper:
| Features |
|---|
This is a small list of features witch Safe Creeper can provide for your server. If you want to see the full list, and a list of planned features, visit this page: Page: Features
- Set if creepers damage the world, also fireballs, TNT and other things
- Get full control of the Wither and EnderDragon bosses!
- Enderman support, set if enderman can place and break blocks, also set if they can clone blocks (get blocks but don't remove them from the world)
- Multi World support
- Start the plugin before loading the world, to ceep everything safe while generating the world and adding the mobs on it
- Optional function that your settings are only avable between two levels, for example, if you want, a creeper can explode only underneeth a level (y coordinate) and above a level.
- Explosion sounds, enable or disable explosion sounds
- Explosion smoke effect
- Set if players can place a TNT block
- Set if creepers will be powerd when they hit by lightning
| External Connections |
|---|
Safe Creeper makes some connections to external servers. One of these connections is to dev.bukkit.org itself. Safe Creeper uses this connection to check whether there are any updates available. Safe Creeper is able to download these updates automatically from the dev.bukkit.org servers. Since Safe Creeper 1.5.2.3, Safe Creeper is also posting anonymous statistics to statistics.timvisee.com. This post request contains little information about the plugin and the server it´s running on. This request contains the version of Craft Bukkit, the version number of Safe Creeper, and the amount of online players, this post request may also contain additional information coming from Safe Creeper itself, like the amount of Creeper´s nerfed by Safe Creeper. A server address is not included because the statistics system is anonymous. The Safe Creeper statistics system will send the server´s address if enabled in the configuration file. This statistics system has been implemented to give people the ability to see how many servers Safe Creeper is running on. And to give an overview of the global usage of certain Safe Creeper features. All these systems could be disabled in the configuration file. Safe Creeper does not connect to any other external server than the two described above.
| Bugs & Issues |
|---|
Please go to the following page to see how to report a bug, this page also contains a list with all known bugs in the current Safe Creeper version.
Page: Bugs
| Donations |
|---|
Please donate some money so I can buy some coffee to make better plugins and even update my old ones :) , I really like it if you give any donation! You could go to a donation page using the button bellow or the donate button above the search-box
Comments
-
timvisee Owner
-
_ForgeUser10215222 Ticket Manager
-
_ForgeUser1256091 Ticket Manager
-
_ForgeUser7953927 Ticket Manager
-
_ForgeUser9793495 Ticket Manager
-
Erackron Ticket Manager
-
Forge_User_69912863 Ticket Manager
-
View User Profile
-
Send Message
Posted Dec 31, 2012@JesterB
The value should be a double, this means that it can hold decimal numbers. To get a multiplier of 30% you should use 1.3 instead of 1.3.3 ;)
Hope this helps
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 31, 2012Under XP:, does the Multiplier value take only whole numbers, or can it take decimals as well -- for example if we wanted to set it to 0.5 to cut drops in half, or 1.33 to increase them by only 30%?
-
View User Profile
-
Send Message
Posted Dec 25, 2012Safe Creeper v1.3.5.2 - Important bug fixed!
Safe Creeper 1.3.5.2 has been released. This is just a small update. It's highly recommended to update to this Safe Creeper version. One of the bugs which has been fixed in this version, is a bug which causes the server to crash.
Important Note: This version requires Bukkit-1.4.6-R0.1 or above for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/659/952/SafeCreeper_1.3.5.2.zip
My website direct link: http:timvisee.com/download/113
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.5.1 or lower
Important! Different than before: Because of the newly added file updater it's way easier to update Safe Creeper. The only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.5.2
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.5.2. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.5.2
-
View User Profile
-
Send Message
Posted Dec 24, 2012@wslauson
Great!
-
View User Profile
-
Send Message
Posted Dec 24, 2012Safe Creeper v1.3.5.1 - CustomDrops, Skeleton/Zombie Type ...
Safe Creeper 1.3.5.1 has been released. This is just a small update. This update contains a few new features, for example 'CustomDrops' has been added. This gives you the ability to control/manage the XP dropped by mobs/players, in the future you should also be able to add additional drops, or to put drops on a black list. Also a feature 'SkeletonType' has been added to the SkeletonControl ('ZombieType' to ZombieControl) to set the chance of a WitherSkeleton to be spawned, for the ZombieControl you can set the chance of a VillagerZombie to be spawned. Also, a few bug fixes have been made, most of them are according to error spamming in the console caused by multiworld stuff.
Important Note: This version requires Bukkit-1.4.6-R0.1 or above for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/659/690/SafeCreeper_1.3.5.1.zip
My website direct link: http:timvisee.com/download/111
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.5 or lower
Important! Different than before: Because of the newly added file updater it's way easier to update Safe Creeper. The only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.5.1
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.5.1. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.5.1
-
View User Profile
-
Send Message
Posted Dec 24, 2012@timvisee.
It worked. Thank you so much!
-
View User Profile
-
Send Message
Posted Dec 22, 2012@wslauson
Hi, could you please test this version.
http://dev.bukkit.org/media/files/659/95/SafeCreeper_1.3.5.zip
If this version still doesnt work, please reply. I've discovered the same problem but this version fixed it for me. It's caused by the new bukkit versions.
EDIT: So if you arent using Bukkit 1.4.6 yet, you should try to install Safe Creeper 1.3.4.1 again :)
Hope this helps,
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 22, 2012Safe Creeper v1.3.5 - Update for 1.4.6...
Safe Creeper 1.3.5 has been released. This is just a small update
Important Note: This version requires Bukkit-1.4.6-R0.1 or above for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/659/95/SafeCreeper_1.3.5.zip
My website direct link: http:timvisee.com/download/109
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.4.1 or lower
Important! Different than before: Because of the newly added file updater it's way easier to update Safe Creeper. The only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.5
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.5. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.5
-
View User Profile
-
Send Message
Posted Dec 22, 2012@timvisee.
Hi.
I updated to 1.4.6R0.1 and am experiencing weird console spam that I think is related to Safe Creeper. When someone logs in, I get a bunch of console spam messages referencing <mob>Control. The mob varies each time. I am running the latest version of Safe Creeper, 1.3.4.1. Can you help me?
Thanks, wslauson
-
View User Profile
-
Send Message
Posted Dec 22, 2012@qwe26481592
You're welcome ;)
-
View User Profile
-
Send Message
Posted Dec 22, 2012Thank you very much of such a fast correction.
I did not use.
-
View User Profile
-
Send Message
Posted Dec 22, 2012@qwe26481592
The new SafeCreeper version 1.3.4.1 has been released, the WitherControl problem has been fixed in here. Please check out this post for more information:
Post: Safe Creeper v1.3.4.1
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 22, 2012Safe Creeper v1.3.4.1 - WitherControl fix...
Safe Creeper 1.3.4.1 has been released. This is just a small fix update which fixes the bug according to the WitherControl. Before the WitherControl won't work properly, it has been fixed now. It's hightly suggested to update to this version.
Important Note: This version requires Bukkit-1.4.5-R1.0 or above for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/659/37/SafeCreeper_1.3.4.1.zip
My website direct link: http:timvisee.com/download/107
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.4 or lower
Important! Different than before: Because of the newly added file updater it's way easier to update Safe Creeper. The only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.4.1
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.4.1. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.4.1
-
View User Profile
-
Send Message
Posted Dec 22, 2012@qwe26481592
Hello, I found the problem. It was a bug in the new config file handler. This problem is fixed now and I'll release the update as soon as possible!
Hope this helps,
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 22, 2012@qwe26481592
I'll take a look at this problem. It might broke with the new bukkit versions :-/
Thanks for the report anyway,
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 22, 2012Profile re-released, so that does not look good because I found.
# Wither (mob)
WitherControl:
Enabled: true
DestroyWorld: false
EnableExplosionSound: false
EnableExplosionSmoke: false
CostumExplosionStrength:
Enabled: false
ExplosionStrength: 3
Spawning: CanSpawnByBreeding: false
CanSpawnWhenBuild: false
CanSpawnWithWorldGeneration: false
CanSpawnCustom: false
CanSpawnNaturally: false
CanSpawnFromSpawner: false
CanSpawnFromSpawnerEgg: false
CanSpawnFromOther: false
SpawningPotionEffects:
Enabled: false
Effects: {}
CustomHealth:
Enabled: false
MinHealth: 300
MaxHealth: 300
CustomEquipment:
Enabled: false
EquipmentSets: {}
Reviving:
Enabled: false
Chance: 25
Radius: 0
MinDelay: 0
MaxDelay: 1.5
RememberTarget: false
Reviver:
Enabled: false
MaxDistance: 16
BroadcastRevive: false
BroadcastRadius: 25
CanDrown: false
CanLaunchProjectile: false
CanPickupItems: false
CanTargetPlayer: false
CanTargetMob: false
DamagePlayers: false
DamageMobs: false
Effects:
Enabled: false
Triggers: {}
Locations: {}
-
View User Profile
-
Send Message
Posted Dec 22, 2012I am sorry I come from the use of Chinese language in the country, but my English is not good so use Google's translation. I do not care what settings can not let creature spawning.
This is my global profile set. # Wither (mob) WitherControl: Enabled: true DestroyWorld: false EnableExplosionSound: false EnableExplosionSmoke: false CostumExplosionStrength: Enabled: false ExplosionStrength: 3 Spawning: CanSpawnByBreeding: false CanSpawnWhenBuild: false CanSpawnWithWorldGeneration: false CanSpawnCustom: false CanSpawnNaturally: false CanSpawnFromSpawner: false CanSpawnFromSpawnerEgg: false CanSpawnFromOther: false SpawningPotionEffects: Enabled: false Effects: {} CustomHealth: Enabled: false MinHealth: 300 MaxHealth: 300 CustomEquipment: Enabled: false EquipmentSets: {} Reviving: Enabled: false Chance: 25 Radius: 0 MinDelay: 0 MaxDelay: 1.5 RememberTarget: false Reviver: Enabled: false MaxDistance: 16 BroadcastRevive: false BroadcastRadius: 25 CanDrown: false CanLaunchProjectile: false CanPickupItems: false CanTargetPlayer: false CanTargetMob: false DamagePlayers: false DamageMobs: false Effects: Enabled: false Triggers: {} Locations: {}
I have set the option of all Spawning false, but can still be summoned or birth.
My English is not good if we look at very hard, and I am very sorry, but I hope this problem is not only to me, because I want to set individual world before they die can be born or not born, you plug SafeCreeper 1.2 version is likely to normal operation, butthe coming version can not I set.
-
View User Profile
-
Send Message
Posted Dec 21, 2012Safe Creeper - Documentation - Mob Equipment
The custom mob equipment feature is available since Safe Creeper 1.3.4. It might be a bit complex to use it the first time. Bellow you can find a link to a documentation page about this feature.
Page: Mob Equipment Documentation
Hope this helps!
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 21, 2012@JesterB
Hi,
A new version of Safe Creeper has been released now, take a look at this post for more information. I'm working on documentation about these features you requested now. I'll post messages on the Safe Creeper pages about the progress of the documentation. I'll also make some tutorial video's which are probably going to be available a bit later on.
Tim Visée
-
View User Profile
-
Send Message
Posted Dec 21, 2012@Serilum
Hi,
This issue has been fixed in the new update (SafeCreeper 1.3.4). Please take a look at this post for more information about the update.
Tim Visée