Bukkit

@ImHackinBored

Great! Thank you too ;)

@ImHackinBored

Yes you are right, I had planned to write documentation for it, but I never really finished it, sadly.

Down here there's a little example about how to work with the 'Locations' for y coordinates;

CreeperControl:
    Enabled: true
    DestroyWorld: false
    Locations:
        Levels:
            '0-44':
                DestroyWorld: true

Again, sorry for the non documented locations stuff, I'll try to write some documentation soon.

Btw using this locations stuff you can also enable/disable stuff inside mob arena's, PVP arena's, soon cuboid and worldedit areas, and more.

Tim Visée

@Phyore

Hello,

The console log looks perfectly fine, no errors in there. So you think the issue has been solved? Great!

Tim Visée

@10jared105

Hello,

Did this problem occur with the newest version available? Please give the command '/sc installupdates' a try and could you please tell me if you still see this error (Please execute this command with version 1.3.6.8)

Thanks in advance,
Tim Visée

@Phyore

Hello,

I was just asking myself, is this the only error popping up in your console? Because if Safe Creeper crashes on start up caused by any error it won't block the Creepers anyway. In the code nothing seems to be wrong. Also, on my personal server no problems occur while executing this command.

May I ask if you have the regulair Bukkit server and NOT a Tekkit server for example, because it might not work on Tekkit or something similair. Also, if you have Bukkit installed are you running CraftBukkit-1.4.7-R1.0 or higher, if not you can't use the newest versions of Safe Creeper cause they're not supported for older Bukkit versions, then you should use a version earlier released build for the CraftBukkit version you are using.

Also, I took a look at the skyblock plugin you where using, but there doesn't seem to be anything conflicting with Safe Creeper in it, you should really check your Bukkit version. Maybe you should even give it a try using the newest Safe Creeper version 1.3.6.7 or maybe 1.3.6.8 at the time you're reading this reply.

Btw, if you don't know what Bukkit version you are using, simply use '/ver' in-game ;)

Tim Visée

@Phyore

Thanks for the report. I'll take a look into the problem right now.

Tim Visée

Safe Creeper v1.3.6.7 - Custom health ...

Safe Creeper 1.3.6.7 has been released. With this update you can give players custom health amounts, for example, you can give players 50 health when they re-spawn instead of the default maximum of 20 HP. Also, some other features have been added. This update also contains 2 little bug fixes. As always, it's recommended to update your Safe Creeper to the newest version.

Important Note: This version requires Bukkit-1.4.7-R1.0 or higher for this update. Lower versions won't work and will cause a huge wall of errors in the console!

Download

Because the Bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from Bukkit or my (timvisee's) website:

Download link: http:timvisee.com/130

All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/

How to update Safe Creeper from 1.3.6.6 or lower

Important! Different than before: If you have Safe Creeper version 1.3.6.6 installed simply use the command '/sc installupdate' to automatically install the update. If it doesn't work or when you have another version of Safe Creeper running, do the steps bellow: It's very easy to update Safe Creeper, the only thing you've to do is update the SafeCreeper.jar file. All your config files are automatically updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automatically added to your config files, so there's no need to fully set up all the config files again!

How to install Safe Creeper 1.3.6.7

If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.6.7. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automatically generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.

Change log for 1.3.6.7

• Added ability to give players custom amount of health.
• Added ability to disable live statistics (provided by MCStats.org).
• Added temporary placeholder message to the '/sc butcher' command.
• Changed health usage of players and living entities to make it more relyable.
• Fixed error on first start up.
• Build against Bukkit-1.4.7-R1.0

Safe Creeper v1.3.6.6 - Command bug fix!

Safe Creeper 1.3.6.6 has been released. This update contains some important bug fixes, according to crashes and strange behaviors of Safe Creeper. It's highly recommended to update Safe Creeper to version 1.3.6.6

Important Note: This version requires Bukkit-1.4.7-R1.0 or higher for this update. Lower versions won't work and will cause a huge wall of errors in the console!

Download

Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:

Bukkit direct link: Don't post links to files that aren't approved yet :)

All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/

How to update Safe Creeper from 1.3.6.5 or lower

Important! Different than before: If you have Safe Creeper version 1.3.6.5 installed simply use the command '/sc installupdate' to automaticly install the update. If it doesn't work or when you have another version of Safe Creeper running, do the steps bellow: It's very easy to update Safe Creeper, the only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!

How to install Safe Creeper 1.3.6.6

If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.6.6. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.

Changelog for 1.3.6.4, 1.3.6.5 & 1.3.6.6

• Added feature to make PigZombies spawn as baby.
• Added feature to make wolves angry when spawned.
• Added feature to make wolves sit when they spawn.
• Added feature to give wolves random collar colors.
• Splitted SkeletonControl into SkeletonControl and WitherSkeletonControl.
• Updated Factions hook.
• Updated MobArena hook.
• Updated PVPArena hook.
• Updated the Likeaboss hook.
• Fixed Safe Creeper crashing on server startup caused by PVPArena API.
• Fixed error occuring while checking for updates.
• Build against Bukkit-1.4.7-R0.1

@Wu_Zhao

Hi,

Yeah, I has to be caused by some other plugin you have installed, but I don't know which one I'm very sorry, although I'll try to troubleshoot the problem again.

Also, about the fire that burns forever, that's not a bug. That's caused by Minecraft itself. The problem is that the file would burn for a while because the fuel won't dissapear. Although, the fire will extinguish after a few minutes, the reason that the fire was still burning in my server, was because once players leave the area the fire is burning, that part of the world will unload, then when a player joins there or walks towards there, the world will load again but the fire will still burn cause it won't process anything around there while that part of the world is unloaded. I hope you understand what I'm trying to say ;)

Tim Visée

@10jared105

Hi,

Very strange, your Bukkit version seems to be fine! I'll take a look into the problem.

Tim Visée

@10jared105

Hello,

May I ask what server version you are using? Please use the command /ver in the console and send the version number to me. That helps a lot.

Thanks in advance,
Tim Visée