Safe Creeper
Current version: Safe Creeper 1.5.3.1 Beta for Minecraft 1.9.2
| Installation | Basics | Add-ons and Support |
| Downloads | Commands | Supported Plugins |
| Installation | Permissions | Add-ons |
| Config | ||
| More | Development | Support |
| Bugs & Issues | API | Donate |
| Changelog | Source | |
| Statics | ||
| What is Safe Creeper |
|---|
Control creepers, Withers, EnderDragons, Enderman, TNT, Fireballs and a lot more!
With Safe Creeper you can control creeper explosions and other things like, fireballs, TNT, Enderman and a lot of other things, you can set if a creeper explosions destroys blocks. You can set if Zombie's can break down doors. You can also set a lot of other things, the possibilities are almost endless! A few other examples are that you can set up if players are able to use TNT blocks, if creepers will explode above the surface and underneath they wont, set if Enderman can place and break blocks, even if they can clone blocks, explosion sounds, smoke effects and a lot of more things. The plugins is fully configurable and it has multi world support. This is a must have for most server administrators.
| Example Video |
|---|
This is an video witch explains the config file system of an older version of Safe Creeper, it should work very similair with the current version. This video also shows you some features from Safe Creeper:
| Features |
|---|
This is a small list of features witch Safe Creeper can provide for your server. If you want to see the full list, and a list of planned features, visit this page: Page: Features
- Set if creepers damage the world, also fireballs, TNT and other things
- Get full control of the Wither and EnderDragon bosses!
- Enderman support, set if enderman can place and break blocks, also set if they can clone blocks (get blocks but don't remove them from the world)
- Multi World support
- Start the plugin before loading the world, to ceep everything safe while generating the world and adding the mobs on it
- Optional function that your settings are only avable between two levels, for example, if you want, a creeper can explode only underneeth a level (y coordinate) and above a level.
- Explosion sounds, enable or disable explosion sounds
- Explosion smoke effect
- Set if players can place a TNT block
- Set if creepers will be powerd when they hit by lightning
| External Connections |
|---|
Safe Creeper makes some connections to external servers. One of these connections is to dev.bukkit.org itself. Safe Creeper uses this connection to check whether there are any updates available. Safe Creeper is able to download these updates automatically from the dev.bukkit.org servers. Since Safe Creeper 1.5.2.3, Safe Creeper is also posting anonymous statistics to statistics.timvisee.com. This post request contains little information about the plugin and the server it´s running on. This request contains the version of Craft Bukkit, the version number of Safe Creeper, and the amount of online players, this post request may also contain additional information coming from Safe Creeper itself, like the amount of Creeper´s nerfed by Safe Creeper. A server address is not included because the statistics system is anonymous. The Safe Creeper statistics system will send the server´s address if enabled in the configuration file. This statistics system has been implemented to give people the ability to see how many servers Safe Creeper is running on. And to give an overview of the global usage of certain Safe Creeper features. All these systems could be disabled in the configuration file. Safe Creeper does not connect to any other external server than the two described above.
| Bugs & Issues |
|---|
Please go to the following page to see how to report a bug, this page also contains a list with all known bugs in the current Safe Creeper version.
Page: Bugs
| Donations |
|---|
Please donate some money so I can buy some coffee to make better plugins and even update my old ones :) , I really like it if you give any donation! You could go to a donation page using the button bellow or the donate button above the search-box
Comments
-
timvisee Owner
-
_ForgeUser10215222 Ticket Manager
-
_ForgeUser1256091 Ticket Manager
-
_ForgeUser7953927 Ticket Manager
-
_ForgeUser9793495 Ticket Manager
-
Erackron Ticket Manager
-
Forge_User_69912863 Ticket Manager
-
View User Profile
-
Send Message
Posted Feb 5, 2013Hey, when I start up my server with the newest update I get this:
19:54:47 [INFO] [SafeCreeper] Enabling SafeCreeper v1.3.6.3
19:54:47 [INFO] [SafeCreeper] Loading global config...
19:54:48 [INFO] [SafeCreeper] Global config loaded, took 157 ms!
19:54:48 [INFO] [SafeCreeper] Loading world configs...
19:54:48 [INFO] [SafeCreeper] 2 world configs loaded, took 8 ms!
19:54:48 [INFO] [SafeCreeper] Retrieving updates data...
19:54:49 [SEVERE] Error occurred while enabling SafeCreeper v1.3.6.3 (Is it up to date?)
java.lang.NoSuchMethodError org.json.JSONObject.isSet(Ljava/lang/String;)Z
at com.timvisee.safecreeper.util.UpdateChecker.refreshUpdatesData(UpdateChecker.java:67)
at com.timvisee.safecreeper.util.UpdateChecker.<init>(UpdateChecker.java:42)
at com.timvisee.safecreeper.SafeCreeper.setupUpdateChecker(SafeCreeper.java:266)
at com.timvisee.safecreeper.SafeCreeper.onEnable(SafeCreeper.java:99)
at org.bukkit.plugin.java.JavaPlugin.setEnabled(JavaPlugin.java:217)
at org.bukkit.plugin.java.JavaPluginLoader.enablePlugin(JavaPluginLoader.java:457)
at org.bukkit.plugin.SimplePluginManager.enablePlugin(SimplePluginManager.java:381)
at org.bukkit.craftbukkit.v1_4_R1.CraftServer.loadPlugin(CraftServer.java:282)
at org.bukkit.craftbukkit.v1_4_R1.CraftServer.enablePlugins(CraftServer.java:264)
at org.bukkit.craftbukkit.v1_4_R1.CraftServer.<init>(CraftServer.java:218)
at net.minecraft.server.v1_4_R1.PlayerList.<init>(PlayerList.java:55)
at net.minecraft.server.v1_4_R1.DedicatedPlayerList.<init>(SourceFile:11)
at net.minecraft.server.v1_4_R1.DedicatedServer.init(DedicatedServer.java:104)
at net.minecraft.server.v1_4_R1.MinecraftServer.run(MinecraftServer.java:399)
at net.minecraft.server.v1_4_R1.ThreadServerApplication.run(SourceFile:849)
-
View User Profile
-
Send Message
Posted Feb 5, 2013@13thRanger
Hi,
That is strange to hear of course, and yeah it shouldn't happen as you can imagine. I will take a look a this issue tomorrow too.
I'm sorry for the issues, I hope it didn't caused any huge problems with your server.
Tim Visée
-
View User Profile
-
Send Message
Posted Feb 5, 2013@13thRanger
I'm sorry I was busy all day. Tomorrow when I'm out of school I'll make a template for zombies with diamond armor with a little explanation in it so you can compare it and put it in your config.
Also, I planned to create a software program to edit the config files. So you can easily do someting like this; Select the zombie mob -> Edit armour -> Change armor easily in here. But this is something to create later on.
If you already fixed it, tell me.
Tim Visée
-
View User Profile
-
Send Message
Posted Feb 5, 2013@Wu_Zhao
Thanks for the report again. Althought I've to say I don't have this problem on my local, and my public server. I think it's caused by another plugin you've installed on your server, could that be right? I mean do you have any plugin stalled for protection, mob arena (arena protection), a plugin like essentials, or something like that that could do something with fire. If you do, I'll debug everything to find out what causes the problem.
So no, there doen't seem to be anything wrong in your config file. But just to make sure, you don't have any world file for the world you're in, or do you? Because if you do, you have to remove the nodes for fire, or you have to disable it in there too. (If you don't put it in there it will get the default from the global).
Tim Visée
-
View User Profile
-
Send Message
Posted Feb 4, 2013you know what I am also testing mob eggs man i wonder if i have those two conflicting im going to edit these files and ill get back tow you on thing .. i am wondering if having them both configed to not spawn mobs if there turning each other off and canceling themselfs out O_o duh!
UPDATE: ok was trying to set the egs not to spawn in the safecreeper ...i used mobegs for that..and the config still not workin i reconfiged just the expolding and world damaging things not to damage the world....and custom zombies and skelitins and its not working ..befor i tested my config on 1.4.7 R0.1 and 1.4.7 R1.1 it worked with older update now it dont
-
View User Profile
-
Send Message
Posted Feb 4, 2013Fire can still spread. (v1.3.6.3)
As i said before the fire does seem to "want to die out" but it manage to spread some anyway. And sometimes it does die, but not always.
You can test my settings and see if it works on your end to or not.
I use this settings:
-
View User Profile
-
Send Message
Posted Feb 4, 2013ok i posted on that thing..but i checked the codeing oon a yml paser and it came up clean ...i just woke up so im going to check spelling errors..but if you can fix it ...can you add some diamond armor to zomies ?? also thank you for the help :)
-
View User Profile
-
Send Message
Posted Feb 4, 2013@13thRanger
Then you have an error in the config file. Please send me your global.yml config file (since I think the problem is in there) then I will fix it for you. Send it to me using https:pastebin.com/ for example.
Tim Visée
-
View User Profile
-
Send Message
Posted Feb 4, 2013Im running the lates craft bukkit 1.4.7 R01 recomended build and the plugin is no tworking creepers are blowing up and there not suppost to . I had the previous update working with the 1.4.7R01.1 and when i went to upgrad it wont work ...and i wont leave my server without it working and this is the beginning of day 4 iv been working on it for over 72 hours strait wtf is wrong i do sc reload and it gives ma an error message.
-
View User Profile
-
Send Message
Posted Feb 3, 2013Safe Creeper v1.3.6.3 - Command bug fix!
Safe Creeper 1.3.6.3 has been released. This is a very small update, but it's a very important one. In this update a bug inside the command '/sc installupdates' has been fixed.
Important Note: This version requires Bukkit-1.4.6-R0.1 or higher for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/669/985/SafeCreeper_1.3.6.3.zip
My website direct link: http:timvisee.com/download/125
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.6.2 or lower
Important! Different than before: If you have Safe Creeper version 1.3.6.2 installed simply use the command '/sc installupdate' to automaticly install the update. If it doesn't work or when you have another version of Safe Creeper running, do the steps bellow: It's very easy to update Safe Creeper, the only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.6.3
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.6.3. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.6.3
-
View User Profile
-
Send Message
Posted Feb 3, 2013@13thRanger
Hello,
Your config looks fine btw, to find out how to use the mob equipment, take a look at this page:
http:dev.bukkit.org/server-mods/safe-creeper/pages/documentation/mob-equipment/
Hope this helps,
Tim Visée
-
View User Profile
-
Send Message
Posted Feb 3, 2013Hey in this line how do i put the right syntax as in how do I put in custom equipment ???
ZombieControl: Enabled: true Spawning: ZombieType: Enabled: true VillagerZombieChance: 50 GiantZombieChance: 0 CanSpawnByBreeding: true CanSpawnWithWorldGeneration: true CanSpawnCustom: true CanSpawnNaturally: true CanSpawnFromSpawner: true CanSpawnFromSpawnerEgg: false CanSpawnForVillageInvasion: true CanSpawnFromOther: true SpawningPotionEffects: Enabled: false Effects: {} CustomAge: Enabled: true Baby: Enabled: true SpawnAsBaby: true SpawnAsBabyChance: 50 CustomHealth: Enabled: false MinHealth: 20 MaxHealth: 20 CustomEquipment: Enabled: true EquipmentSets: {} CustomDrops: Enabled: true OverwriteDefaultDrops: false XP: Enabled: false DropXP: true DropChance: 100 Multiplier: 1 Skull: Enabled: false Chance: 1 Amount: 1 Reviving: Enabled: false Chance: 25 Radius: 0 MinDelay: 0 MaxDelay: 1.5 RememberTarget: true Reviver: Enabled: false MaxDistance: 16 BroadcastRevive: true BroadcastRadius: 25 Despawning: Enabled: false DespawnWhenFarAway: true CanDrown: true CanPickupItems: true CanTargetPlayer: true CanTargetMob: true DamagePlayers: true DamageMobs: true CanBreakDoor: true Effects: Enabled: false Triggers: {} Locations: {}
-
View User Profile
-
Send Message
Posted Feb 3, 2013Safe Creeper v1.3.6.2 - Auto updater change!
Safe Creeper 1.3.6.2 has been released. This is a very small update, but it's a very important one. In this update only two things have changed. The first change is that a filter has been added to the auto updater. This filter blocks updates from downloading from other sites than Bukkit, which is required cause of a Bukkit rule. The second change is that a issue has been fixed inside the Auto updater causing Safe Creeper to don't update properly.
Important Note: This version requires Bukkit-1.4.6-R0.1 or higher for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/669/978/SafeCreeper_1.3.6.2.zip
My website direct link: http:timvisee.com/download/123
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.6.1 or lower
Important! Different than before: If you have Safe Creeper version 1.3.6.1 installed simply use the command '/sc installupdate' to automaticly install the update. If it doesn't work or when you have another version of Safe Creeper running, do the steps bellow: It's very easy to update Safe Creeper, the only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.6.2
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.6.2. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.6.2
-
View User Profile
-
Send Message
Posted Jan 31, 2013Safe Creeper v1.3.6.1 - Slime sizes
Safe Creeper 1.3.6.1 has been released. This is a very small update, it only contains one new feature, and a fix. The new feature is 'CustomSize' for the Slime and the Magma Cube control. Now you can make slimes (and magma cubes) spawn in custom sizes. That means that you are also able to make them 10 times bigger than they could normally spawn. Also, a bug which caused the MagmaCube control to don't work properly, is fixed. Because of this it's highly suggested to update to the newest Safe Creeper version!
Important Note: This version requires Bukkit-1.4.7-R0.1 or higher for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/669/8/SafeCreeper_1.3.6.1.zip
My website direct link: http:timvisee.com/download/121
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.6 or lower
Important! Different than before: If you have Safe Creeper version 1.3.6 installed simply use the command '/sc installupdate' to automaticly install the update. If it doesn't work or when you have another version of Safe Creeper running, do the steps bellow: It's very easy to update Safe Creeper, the only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.6.1
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.6.1. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.6.1
-
View User Profile
-
Send Message
Posted Jan 31, 2013Safe Creeper v1.3.6 - Auto updater, giants, fixes...
Safe Creeper 1.3.6 has been released. This update contains some new features and a lot of fixes. The first new feature you will notice is the auto updater. From now on Safe Creeper will automaticly install new updates released, so you don't have to update Safe Creeper manually yourself. This is to add another security layer to your server if you are running an too old Safe Creeper version. Another thing which has been added is for example 'AlwaysAngry' to make PigZombies always angry when they spawn. There's a lot more stuff, you can find it all in the changelog on the bottom of this post.
Important Note: This version requires Bukkit-1.4.7-R0.1 or higher for this update. Lower versions won't work and will cause a huge wall of errors in the console!
Download
Because the bukkit administrators need to validate the new plugin files, the download probably isn't available yet on this page. We highly recommend you to download the file from bukkit or my (timvisee's) website:
Bukkit direct link: http:dev.bukkit.org/media/files/668/972/SafeCreeper_1.3.6.zip
My website direct link: http:timvisee.com/download/119
All versions: http:timvisee.com/projects/bukkit/safe-creeper/downloads/
How to update Safe Creeper from 1.3.5.2 or lower
Important! Different than before: Because of the newly added file updater it's way easier to update Safe Creeper. The only thing you've to do is update the SafeCreeper.jar file. All your config files are automaticly updated as soon as you restart the Safe Creeper plugin with the new .jar file. Also, all the new features are automaticly added to your config files, so there's no need to fully set up all the config files again!
How to install Safe Creeper 1.3.6
If you haven't installed an earlier version of Safe Creeper on your server you've to do the following to install Safe Creeper on your server. The first thing you've to do is download the files of Safe Creeper 1.3.6. Inside this downloaded .zip file is a SafeCreeper.jar file. You need to place this file into your plugins folder of your server. Make sure you've shut down your server first. Then you also need to copy the Safe Creeper (from the downloaded .zip file) into your plugins folder, because this folder contains all the config files. If you are not able to add this folder you don't have to copy them. Safe Creeper will automaticly generate it's config files if they aren't available on start up. Although I highly suggest to copy this folder if you are able to. After this you can make your changes in the config files if you want and you can start up your server again.
Changelog for 1.3.6
-
View User Profile
-
Send Message
Posted Jan 29, 2013@angtom
Hi,
Make sure you have booth the TNTControl and the CreeperControl enabled, also set 'DestroyWorld' in booth controls to false. That will solve the problem. After you changed that, save the config file and run the following command in-game: /sc reload, or restart the server. That should solve the problem.
Tim Visée
-
View User Profile
-
Send Message
Posted Jan 28, 2013mine is not working TNT can't make a holl but creepers can make a holl :( please help me
-
View User Profile
-
Send Message
Posted Jan 23, 2013TVNLib for Minecraft 1.4.6 and 1.4.7!
TVNLib has been updated. TVNLib is a little plugin which adds a lot more features to Safe Creeper. It's highly suggested to install the TVNLib add-on too on your Safe Creeper server. If you where using TVNLib before please update to the newest version for Minecraft 1.4.6 and 1.4.7.
TVNLib pages: http:dev.bukkit.org/server-mods/safe-creeper/pages/add-ons/tvnlib/
TVNLib Download: http:timvisee.com/download/115
TVNLib Download (Mirror): http:timvisee.com/download/116
-
View User Profile
-
Send Message
Posted Jan 17, 2013@timvisee
I know, thank you.
-
View User Profile
-
Send Message
Posted Jan 17, 2013@qwe26481592
This is caused by the MCStats.org service we use, their servers have downtimes the last weeks. You can probably ignore the error in the console, it won't affect the preformance and abilities of Safe Creeper at all. A fix will be released very soon. You will be notified in-game by the update checker once the new version has been released.
Tim Visée