Road
Road - Highspeed railways, Booster launchers, Aerial faith plates
- I Updated this plugin, it was inactive
Installation!
1. Put plugin in plugins folder.
2. Start server.
3. A new config file will be created, Edit it so it fits your needs.
4. Restart server. (Restart required on config Creation / Recreation.)
Configs has ben added!
The config file will be created upon first load.
Command /reload works if you want to use changed values in config.
Features:
These are the default Blocks, You can change them in the config.
Highspeed railway:
Usage:
Stack 3 blocks in the following fashion to create a highspeed railway:
Any Block
Hold down sneak on the railway and travel forward at Speeds set in config! A very convenient way to travel around a huge world.
Booster launchers: Usage: Stack 4 blocks in the following fashion to create a booster launcher: Any block above a diamond block (57) above a glass block (20) above a lapiz lazul block (22)
Any Block

Stand on the launch pad to get sent high into space! Better suit up or you just might die
Aerial faith plates: Usage: Stack 3 blocks in the following fashion to create an aerial faith plate like seen in portal 2! Any block above a brick block (45) above an iron ore (15)
Direction of repeater
Any Block

Next, attach a redstone repeater above the top block. The direction of the repeater is the direction the plate will launch you towards.
- Issue: Aerial faith plates do not accurately send you in the correct direction: This issue has to do with a discrepancy between the server and the client. The vector of your trajectory is programmed correctly, but it is up to the client to interpret this. Currently, there is no fix for this problem. =[
Permissions (v1.0)
- road.highway - Permission to use Highways.
- road.boosterl - Permission to use Booster Launchers.
- road.aerialfp - Permission to use Aerial faith plates.
Default Config: v1.0
highway: enabled: true speed: 4 top: - any middle: - 20 bottom: - 41 boosterl: enabled: true pwr: 5 top: - 57 middle: - 20 bottom: - 22 Aerialfp: enabled: true speed: 2 this: - 93 top: - 45 bottom: - 15
Config Explained
#Do not use this as Config! highway: enabled: true # If the feature is enabled. speed: 4 # The speed of the movement. top: # The block below the one you are standing on. - any middle: # The block below top block, You can add multiple lines. - 20 bottom: # The block below middle block, You can add multiple lines. - 41 boosterl: enabled: true pwr: 5 # The power it throws you. top: - 57 middle: - 20 bottom: - 22 Aerialfp: enabled: true speed: 2 this: # The block you are in. - 93 top: - 45 bottom: - 15
-
View User Profile
-
Send Message
Posted Aug 11, 2014@LordKainzo
yes, its designed that way.
-
View User Profile
-
Send Message
Posted Aug 11, 2014Is it required to sneak to get the boost?
-
View User Profile
-
Send Message
Posted Jun 29, 2014@James259
I will take a look at it.
First of, I noticed the "instructions" is not clear enough...
I tested it, And it looks like it works fine, Thus gravel is ID 13.
To avoid some confusion, The "TOP" block is the block below the block you are standing on, While "THIS" is the block you are inside.
EDIT: There seems to be an Logic Error, Will fix it.
-
View User Profile
-
Send Message
Posted Jun 29, 2014I seem to be having the same problem as symptomy. I have set my blocks to:
14 4 any
so top two blocks gravel on top of cobble, bottom block doesnt matter. (is air in my case) nothing seems to happen. also tried with a none-air block under the cobble. (config still set to any)
-
View User Profile
-
Send Message
Posted May 19, 2014This is a nice plugin but I'm having a bit of a problem with the top blocks of the roads. Can I set them to a specific ID or does it have to set to "any" ?
-
View User Profile
-
Send Message
Posted Mar 15, 2014@raldo9 THX....
-
View User Profile
-
Send Message
Posted Mar 15, 2014@LeTruent
Probably, Don't want to add too much logic to the check.
-
View User Profile
-
Send Message
Posted Mar 15, 2014could you make it working only in a chosen world ?
-
View User Profile
-
Send Message
Posted Mar 13, 2014@raldo94
Huh?^^
-
View User Profile
-
Send Message
Posted Mar 12, 2014@Lenua87
Could you elaborate more?
-
View User Profile
-
Send Message
Posted Mar 12, 2014I noticed another Problem: The Players are not so fast as it should be :/ What could prevent the fast speed? Plugin List is still the same.
-
View User Profile
-
Send Message
Posted Mar 3, 2014Looking into this now. I'll post an update with the startup log in a minute.
Update #1, I just realized I'm running craftbukkit 1.7.2, that's probably the problem. I'll look into this and see if it fixes it.
Update #2, I just updated from craftbukkit-1.7.2-R0.2 to craftbukkit-1.7.2-R0.3 and it fixed it. Apparently this plugin will not even be recognized under R.0.2.
Thanks for the quick respons!
-
View User Profile
-
Send Message
Posted Mar 3, 2014@darkrider0
Hm, might be something wrong with the first startup, Try to create a folder called "Road" and a file config.yml and paste the default config.
Update: Just downloaded the plugin and tested on an clean mc server, No issues. Could you post the startup log?
-
View User Profile
-
Send Message
Posted Feb 27, 2014@raldo94
Works perfect! BIIIIIIIIIIIIIIIG THANK YOU from germany !! ♥ :)
-
View User Profile
-
Send Message
Posted Feb 24, 2014@raldo94
Thank you :)
-
View User Profile
-
Send Message
Posted Feb 24, 2014@Lenua87
@Igorvas
Plugin fixed, Rewrote most of the plugin, waiting for approval.
-
View User Profile
-
Send Message
Posted Feb 23, 2014@raldo94
Thank you ♥ (I'm using this http://ci.md-5.net/job/Spigot/)
-
View User Profile
-
Send Message
Posted Feb 23, 2014The problem is within the plugin, It didn't work with the latest bukkit build, But it worked with the latest when i released the update, I'm looking into it.
-
View User Profile
-
Send Message
Posted Feb 23, 2014@Igorvas
No i installed speedwalks after the Error
-
View User Profile
-
Send Message
Posted Feb 23, 2014@Lenua87 I think ist the Speedwalsks plugin...