bPermissions
bPermissions
Welcome to bPermissions, a Superperms Manager for Bukkit! bPermissions focuses on being unique from the rest of the Permission managers. It's very simple to set up and use, it's lightning fast, fully featured, and has a great support team!
Some features:
- bPermissions has a gui client specifically designed to make running a server so easy that you'll forget that you ever used any other permissions plugin. Get it here!
- bPermissions has a unique command structure, never before seen in a permission manager. It's best used for adding lots of nodes to a user or group from the console or in-game, less typing!
- bPermissions has everything you would expect from a Permissions manager. Prefix and suffix support, inheritance, per-player permissions, multiworld support, promotion/demotion tracks, and even group priorities for multi-group setups.
- Note - bPermissions only defines prefixes and suffixes. You need a chat plugin such as bChatManager for them to show up in chat.
Commands
Say you have a user called 'Bob' and you want to put him in the group 'admin' and give him the prefix 'awesome'.
- /world yourmainworld - selects the world "yourmainworld"
- /user bob - selects the user "bob"
- /user setgroup admin - set bob's group as "admin"
- /user meta prefix awesome - set bob's prefix to "awesome"
You can do the same with groups!
- /world yourmainworld - again, selects the world
- /group admin - selects the group "admin"
- /group addgroup moderator - makes the admin group inherit from the moderator group
- /group meta prefix &c[Admin] - sets the admin prefix to "&c[Admin]"
Some other commands are as follows
- /permissions (or /bperms,/bp,/p) - general commands for bPermissions are prefixed by this
- /permissions import pex - import a pex permissions.yml in the pex folder
- /permissions reload - reloads your bPermissions files
- /permissions save - if auto-save is false, this saves your perms
- /permissions backup - backup your permissions
- /permissions helpme - for the lazy among you, this spews out some basic permissions files into your folder.
In order to use these commands, you'll need the permissions node bPermissions.admin
For configurable /promote and /demote tracks, you'll want to use permissions tracks. To read about those, visit this page
Want more commands? We have some others over on the commands page. Check 'em out!
Editing Files
bPermissions creates per world groups.yml and users.yml files in the bPermissions folder, which allow you to configure permissions on a per world basis.
Because bPermissions was designed to be configured largely via commands, bPermissions will often overwrite changes to these files especially if you /reload or restart the server.
If you've edited the files, you MUST use /permissions reload to load the modified files into the server, otherwise the permissions changes won't apply. Because a standard /reload unloads all plugins like a server stop, we cannot tell the difference between them and this will overwrite changes to your files with whatever the server last stored.
World mirroring
Worlds are mirrored like so:
world_mirroring_to: world_mirroring_from world_nether: world world_the_end: world
This duplicates the whole config for that world. Currently there's no way to have just the users or the groups mirrored, stay tuned for an update that adds this!
bPermissions and EssentialsChat
Allow me to put this issue to bed. Essentials Chat + bPermissions works for prefix and color.
This guide is for current users of EssentialsChat and want to use bPermissions along with it.
Players have colored rank prefixes and faction chat modes are also colored. All text can be colored by the players too using color codes such as &c.
bPermissions\world\groups.yml ( code snippet )
default: default groups: ## Peasant ## default: permissions: - group.default - group.userannouncer - group.userauction groups: - userannouncer - userauction meta: priority: '100' ## Citizen ## rank1: permissions: - group.default - group.rank1 groups: - default meta: priority: '200'
It has nothing configured for prefix but the group names are important (default, rank1)
Essentials\config.yml ( Code Snippet )
change-displayname: true #add-prefix-suffix: false player-commands: - chat.color - chat.format - chat.shout - chat.question chat: radius: 0 group-formats: default: '&8&lPeasant &r&8{DISPLAYNAME}&7:&r {MESSAGE}' rank1: '&8&lCitizen &r&7{DISPLAYNAME}&7:&r {MESSAGE}' moderator: '&e&l[Mod] &r&3{DISPLAYNAME}&7:&r {MESSAGE}' admin: '&c&l[Admin] &r&e{DISPLAYNAME}&7:&r {MESSAGE}'
Please direct all other Essentials support to their official support networks.
How do I get support?
First, we highly recommend you go read the FAQ page. If the answer isn't there, there's a few options of support.
- Visit the #bananacode irc channel on irc.esper.net. Just head there, as your question, and wait for someone to help you. It might be a while before you get an answer, so be patient!
- You can file a ticket. This is recommended if you don't have the time to hang around in the IRC or you have a bug report. Be prepared to check back to the ticket though, and make sure you attach your bPermissions groups and users yml files to the ticket.
- Comment on the bPermissions main page.
Note that as there's only one (slightly inactive) maintainer at the moment, any support queries may take some time.
However you choose to get support, "pls dont use txt spk," and make sure you use actual grammar.
I'm a developer!
If you wish to hook your plugin into bPermissions, please see the Developer Page for more information! If you wish to contribute code to bPermissions, fork us on GitHub!
Development builds of this project can also be downloaded from GitHub now. These builds have not been approved by the BukkitDev staff, and are possibly buggy. Use them at your own risk.
-
View User Profile
-
Send Message
Posted Jan 11, 2012@rymate1234
Try 2.6.3+, there was a problem in 2.6 where new users didn't get meta data assigned, though they still had default permissions. May have been your problem.
-
View User Profile
-
Send Message
Posted Jan 11, 2012I seem to be having an issue with my default group people are not automatically being added to it using bPermissions 2.6
-
View User Profile
-
Send Message
Posted Jan 11, 2012The same problem as my server =(
-
View User Profile
-
Send Message
Posted Jan 11, 2012I'm using bPermissions 2.1.4b with the Residence plugin with no problem.
When moving to bPermissions 2.6.3 I get the following error:
Is that a problem only on the side of Residence? Or is there something I can do?
-
View User Profile
-
Send Message
Posted Jan 11, 2012Anyone else having issues with Towny permissions after switching to 2.6 + Bridge + Towny Dev to make it all work? I have no errors spamming anymore but I do have towny crying about build switches and building in the wild despite having proper nodes.
-
View User Profile
-
Send Message
Posted Jan 11, 2012If you want i could always look at regios and it's permissions since that's what i use. It's not self serve ,but it's worldguard like protection although i perfer it better.
-
View User Profile
-
Send Message
Posted Jan 11, 2012that maybe a problem you should take up with the authors of the Residence plugin.
-
View User Profile
-
Send Message
Posted Jan 11, 2012I installed SuperPermsBridge but I still give the same failure with bpermissions.
2012-01-11 18:39:24 [WARNING] [PermissionsHandler] Permission-Plugin not found, default to OP! 2012-01-11 18:39:24 [INFO] [MobDisguise] by desmin88 version 1.65 enabled. 2012-01-11 18:39:24 [INFO] RepairShop version 1.3 hooked into iConomy! 2012-01-11 18:39:24 [INFO] RepairShop version 1.3 could'nt find Permissions. OP mode enabled! 2012-01-11 18:39:24 [INFO] RepairShop version 1.3 is enabled! 2012-01-11 18:39:24 [SEVERE] null java.lang.ClassCastException: de.bananaco.bpermissions.imp.Permissions cannot be cast to de.bananaco.permissions.Permissions at com.bekvon.bukkit.residence.permissions.PermissionManager.checkPermissions(PermissionManager.java:123) at com.bekvon.bukkit.residence.permissions.PermissionManager.<init>(PermissionManager.java:46) at com.bekvon.bukkit.residence.Residence.onEnable(Residence.java:189) at org.bukkit.plugin.java.JavaPlugin.setEnabled(JavaPlugin.java:188) at com.bekvon.bukkit.residence.Residence.setEnabled(Residence.java:1748) at org.bukkit.plugin.java.JavaPluginLoader.enablePlugin(JavaPluginLoader.java:968) at org.bukkit.plugin.SimplePluginManager.enablePlugin(SimplePluginManager.java:280) at org.bukkit.craftbukkit.CraftServer.loadPlugin(CraftServer.java:186) at org.bukkit.craftbukkit.CraftServer.enablePlugins(CraftServer.java:169) at net.minecraft.server.MinecraftServer.t(MinecraftServer.java:348) at net.minecraft.server.MinecraftServer.a(MinecraftServer.java:335) at net.minecraft.server.MinecraftServer.init(MinecraftServer.java:165) at net.minecraft.server.MinecraftServer.run(MinecraftServer.java:399) at net.minecraft.server.ThreadServerApplication.run(SourceFile:457) 2012-01-11 18:39:25 [INFO] [Residence] Successfully linked with iConomy! Version: 6.0.8b 2012-01-11 18:39:25 [INFO] [Residence] Loaded...
-
View User Profile
-
Send Message
Posted Jan 11, 2012@TechCraft
Sorry, I'll edit the FAQ page right now. '*' node alone will cause that message, but somenode.* will work if a plugin supports it.
-
View User Profile
-
Send Message
Posted Jan 11, 2012cloud_strife_91spain you may want to try the superperms bridge. SuperPermsBridge I'm working on perms myself trying to get things like worldedit working it may take a bit.
-
View User Profile
-
Send Message
Posted Jan 11, 2012I need help with the following error, that is?
2012-01-11 18:39:24 [WARNING] [PermissionsHandler] Permission-Plugin not found, default to OP! 2012-01-11 18:39:24 [INFO] [MobDisguise] by desmin88 version 1.65 enabled. 2012-01-11 18:39:24 [INFO] RepairShop version 1.3 hooked into iConomy! 2012-01-11 18:39:24 [INFO] RepairShop version 1.3 could'nt find Permissions. OP mode enabled! 2012-01-11 18:39:24 [INFO] RepairShop version 1.3 is enabled! 2012-01-11 18:39:24 [SEVERE] null java.lang.ClassCastException: de.bananaco.bpermissions.imp.Permissions cannot be cast to de.bananaco.permissions.Permissions at com.bekvon.bukkit.residence.permissions.PermissionManager.checkPermissions(PermissionManager.java:123) at com.bekvon.bukkit.residence.permissions.PermissionManager.<init>(PermissionManager.java:46) at com.bekvon.bukkit.residence.Residence.onEnable(Residence.java:189) at org.bukkit.plugin.java.JavaPlugin.setEnabled(JavaPlugin.java:188) at com.bekvon.bukkit.residence.Residence.setEnabled(Residence.java:1748) at org.bukkit.plugin.java.JavaPluginLoader.enablePlugin(JavaPluginLoader.java:968) at org.bukkit.plugin.SimplePluginManager.enablePlugin(SimplePluginManager.java:280) at org.bukkit.craftbukkit.CraftServer.loadPlugin(CraftServer.java:186) at org.bukkit.craftbukkit.CraftServer.enablePlugins(CraftServer.java:169) at net.minecraft.server.MinecraftServer.t(MinecraftServer.java:348) at net.minecraft.server.MinecraftServer.a(MinecraftServer.java:335) at net.minecraft.server.MinecraftServer.init(MinecraftServer.java:165) at net.minecraft.server.MinecraftServer.run(MinecraftServer.java:399) at net.minecraft.server.ThreadServerApplication.run(SourceFile:457) 2012-01-11 18:39:25 [INFO] [Residence] Successfully linked with iConomy! Version: 6.0.8b 2012-01-11 18:39:25 [INFO] [Residence] Loaded...
-
View User Profile
-
Send Message
Posted Jan 11, 2012Dutch bPermissions Page!!: http://dev.bukkit.org/server-mods/bpermissions-plugin/
-
View User Profile
-
Send Message
Posted Jan 11, 2012@fffizzz There is not a '*' node in bPermissions. As the wildcard node is not supported in the Bukkit permissions API by default, we do not support it. (However, it will still work for plugins that check for Permissions 2/3 permissions)
The permissions all work, it happens to no one else but me. Everyone else can talk in the chat but not me.
-
View User Profile
-
Send Message
Posted Jan 11, 2012@TechCraft
Hey TechCraft, perhaps you should read this section again
Does bPermissions with with XXX plugin?
-
View User Profile
-
Send Message
Posted Jan 11, 2012Why is this spamming everything I say anything on my server with Bperms "The '*' node won't work with superperms! Rawr!"
All I did is import /bp import p3 then /bp reload
It says it supports Permission 3's '*' perms so why can't it do it? But other then that learning the new layout and liking it, but I would like to talk in the chat again but hey its the end of the world
-
View User Profile
-
Send Message
Posted Jan 11, 2012@dilbukon
Sure, I'm working on a fix that updates the players you've been working on :)
-
View User Profile
-
Send Message
Posted Jan 10, 2012@Darq_Alder
Thanks for the reply, but I'm currently using v2.6.2.
I also use /p reload after going through he procedure I've written.
Any idea how we can solve this problem?
-
View User Profile
-
Send Message
Posted Jan 10, 2012@dilbukon
Make sure you're using at least 2.6.1+, there's a current bug where between adding a group/permission to someone and reloading, you must select the player/group again. After doing /p save you'll also have to do /p reload, aswell.
The commands were restructured in favour of making it easier to add a lot of nodes to a group or player easily.
-
View User Profile
-
Send Message
Posted Jan 10, 2012Hm... I'm having trouble using bPermissions in-game.
It worked perfectly before the new changes, but now it never works.
/world world
/user player
/user setgroup GoodPlayer
/p save
It seems a lot of work to just change a setting of a player.
And for some reason that does not change his group. In-game doesn't change it, the file still stays the same.
Before it was just "/setgroup GoodPlayer player" and I'm not a big fan of how this plugin turned into after the recent overhaul. :/
Am I doing anything wrong here?
-
View User Profile
-
Send Message
Posted Jan 10, 2012@Lyndon321
Read the FAQ, you're most likely using the old prefix system.
@Redstoner_Pro
All you have to do to move from bPermissions 2.0 is split users/groups into two files, don't need to change any of the lines, bPermissions will do that for you!