bPermissions
bPermissions
Welcome to bPermissions, a Superperms Manager for Bukkit! bPermissions focuses on being unique from the rest of the Permission managers. It's very simple to set up and use, it's lightning fast, fully featured, and has a great support team!
Some features:
- bPermissions has a gui client specifically designed to make running a server so easy that you'll forget that you ever used any other permissions plugin. Get it here!
- bPermissions has a unique command structure, never before seen in a permission manager. It's best used for adding lots of nodes to a user or group from the console or in-game, less typing!
- bPermissions has everything you would expect from a Permissions manager. Prefix and suffix support, inheritance, per-player permissions, multiworld support, promotion/demotion tracks, and even group priorities for multi-group setups.
- Note - bPermissions only defines prefixes and suffixes. You need a chat plugin such as bChatManager for them to show up in chat.
Commands
Say you have a user called 'Bob' and you want to put him in the group 'admin' and give him the prefix 'awesome'.
- /world yourmainworld - selects the world "yourmainworld"
- /user bob - selects the user "bob"
- /user setgroup admin - set bob's group as "admin"
- /user meta prefix awesome - set bob's prefix to "awesome"
You can do the same with groups!
- /world yourmainworld - again, selects the world
- /group admin - selects the group "admin"
- /group addgroup moderator - makes the admin group inherit from the moderator group
- /group meta prefix &c[Admin] - sets the admin prefix to "&c[Admin]"
Some other commands are as follows
- /permissions (or /bperms,/bp,/p) - general commands for bPermissions are prefixed by this
- /permissions import pex - import a pex permissions.yml in the pex folder
- /permissions reload - reloads your bPermissions files
- /permissions save - if auto-save is false, this saves your perms
- /permissions backup - backup your permissions
- /permissions helpme - for the lazy among you, this spews out some basic permissions files into your folder.
In order to use these commands, you'll need the permissions node bPermissions.admin
For configurable /promote and /demote tracks, you'll want to use permissions tracks. To read about those, visit this page
Want more commands? We have some others over on the commands page. Check 'em out!
Editing Files
bPermissions creates per world groups.yml and users.yml files in the bPermissions folder, which allow you to configure permissions on a per world basis.
Because bPermissions was designed to be configured largely via commands, bPermissions will often overwrite changes to these files especially if you /reload or restart the server.
If you've edited the files, you MUST use /permissions reload to load the modified files into the server, otherwise the permissions changes won't apply. Because a standard /reload unloads all plugins like a server stop, we cannot tell the difference between them and this will overwrite changes to your files with whatever the server last stored.
World mirroring
Worlds are mirrored like so:
world_mirroring_to: world_mirroring_from world_nether: world world_the_end: world
This duplicates the whole config for that world. Currently there's no way to have just the users or the groups mirrored, stay tuned for an update that adds this!
bPermissions and EssentialsChat
Allow me to put this issue to bed. Essentials Chat + bPermissions works for prefix and color.
This guide is for current users of EssentialsChat and want to use bPermissions along with it.
Players have colored rank prefixes and faction chat modes are also colored. All text can be colored by the players too using color codes such as &c.
bPermissions\world\groups.yml ( code snippet )
default: default groups: ## Peasant ## default: permissions: - group.default - group.userannouncer - group.userauction groups: - userannouncer - userauction meta: priority: '100' ## Citizen ## rank1: permissions: - group.default - group.rank1 groups: - default meta: priority: '200'
It has nothing configured for prefix but the group names are important (default, rank1)
Essentials\config.yml ( Code Snippet )
change-displayname: true #add-prefix-suffix: false player-commands: - chat.color - chat.format - chat.shout - chat.question chat: radius: 0 group-formats: default: '&8&lPeasant &r&8{DISPLAYNAME}&7:&r {MESSAGE}' rank1: '&8&lCitizen &r&7{DISPLAYNAME}&7:&r {MESSAGE}' moderator: '&e&l[Mod] &r&3{DISPLAYNAME}&7:&r {MESSAGE}' admin: '&c&l[Admin] &r&e{DISPLAYNAME}&7:&r {MESSAGE}'
Please direct all other Essentials support to their official support networks.
How do I get support?
First, we highly recommend you go read the FAQ page. If the answer isn't there, there's a few options of support.
- Visit the #bananacode irc channel on irc.esper.net. Just head there, as your question, and wait for someone to help you. It might be a while before you get an answer, so be patient!
- You can file a ticket. This is recommended if you don't have the time to hang around in the IRC or you have a bug report. Be prepared to check back to the ticket though, and make sure you attach your bPermissions groups and users yml files to the ticket.
- Comment on the bPermissions main page.
Note that as there's only one (slightly inactive) maintainer at the moment, any support queries may take some time.
However you choose to get support, "pls dont use txt spk," and make sure you use actual grammar.
I'm a developer!
If you wish to hook your plugin into bPermissions, please see the Developer Page for more information! If you wish to contribute code to bPermissions, fork us on GitHub!
Development builds of this project can also be downloaded from GitHub now. These builds have not been approved by the BukkitDev staff, and are possibly buggy. Use them at your own risk.
-
View User Profile
-
Send Message
Posted Jan 8, 2013When i try to do /promote enteih20 Normal (normal is what my default track is called) it says:
[bPermissions{ That track (Normal) does not exist
please help. I have done it case sensitive aswell but it still wont work......
PLEASE HELP ASAP! NEED IT FOR MY SERVER OTHERWISE PEOPLE GUNA GRIEF!
-
View User Profile
-
Send Message
Posted Jan 7, 2013hey codenameb i have bpermissions i have updated the plugin and i have written all the permissions but how do i load them on to the server
-
View User Profile
-
Send Message
Posted Jan 7, 2013@tiwar
Your indentation is wrong, I don't have time to fix it for you. If you want to move from pex just delete all the bPermissions files, let them regenerate then run /permissions import pex
-
View User Profile
-
Send Message
Posted Jan 7, 2013Howdy,im trying to go from pex to bpermissions,problem is im not doing so well,Hopefully someone good with bpermissions can shed some light on this.This is what i came up with after reading faqs and documentation http://pastebin.com/G9ruVMz7 My problem is that this setup don't seem to do what i want it to do.Eg. i can't open others chests with lockette,and everyone sees the "bla bla has broken a container" amongst other problems.i have set myself as owner in users..please help me.Regards tiwar
-
View User Profile
-
Send Message
Posted Jan 7, 2013@codename_B
Whoohoo! Error is gone!
Hero!
-
View User Profile
-
Send Message
Posted Jan 7, 2013http://dev.bukkit.org/media/files/663/214/bpermissions.jar
-
View User Profile
-
Send Message
Posted Jan 7, 2013@TheFamousFlyingDutchman
Ah, that's my bad for not including a method in the update.
I'll push out a version now that should fix it.
-
View User Profile
-
Send Message
Posted Jan 7, 2013@codename_B
Ok, 2.10.1 seems to be stable. However I get this error with one plugin (OnTime):
Is this a bPermission or OnTime plugin error? I do not get the error with bPermissions 2.9.26.
-
View User Profile
-
Send Message
Posted Jan 7, 2013@TheFamousFlyingDutchman
2.10.1 works with old Vault
@LordKainzo
Thanks Kainzo. I'll see what I can do about that.
Can you send me the log with debug mode enabled? It takes less than a second to start on my server.
-
View User Profile
-
Send Message
Posted Jan 7, 2013Is an update to Vault still required to get version 2.10.1 running without errors?
The makers of Vault do not seem to update their plugin to support bPermissions latest versions...
-
View User Profile
-
Send Message
Posted Jan 6, 2013@codename_B
On the last dev you gave me, it caused the server to take 30-45 seconds to start. (Christ it was painful)
Reverted to the build on *.23 and it's going all dandy :p
-
View User Profile
-
Send Message
Posted Jan 6, 2013@codename_B
BungeeCord requires the server to be in offline mode but it still validates logins against minecraft.net. Luckily you can just switch a config option in bPermissions to support offline mode and it works perfectly.
-
View User Profile
-
Send Message
Posted Jan 6, 2013@SparkezzHD
Don't run an offline mode server, problem solved.
-
View User Profile
-
Send Message
Posted Jan 6, 2013@LordKainzo
Bukkit has moved the playerPreLogin event to async. I can make it block till the permissions are setup though. That should work.
This is fine tuning the new api bukkit has for me, no more async scheduler :(
-
View User Profile
-
Send Message
Posted Jan 6, 2013@SkyPrison
Mirroring means that the EXACT same set of permissions is used in that world. If you want a global set, with unique sets per world you should use that setup instead.
-
View User Profile
-
Send Message
Posted Jan 6, 2013@everyone
I undestand you all rely on bPermissions, and that's why I'm taking time out from studying to fix this for you. Rest assured, I have not abandoned you!
-
View User Profile
-
Send Message
Posted Jan 6, 2013@codename_B
issues occurring. Whenever someone who hasnt been added to the users.yml logs in, they do not have the ability to chat in Herochat Channels (no channels are autojoined)
This was working in the previous versions of bPermissions. They should be in the "greylisted" group with these perms:
- herochat.autojoin.alert
- herochat.autojoin.event
- herochat.autojoin.local
- herochat.autojoin.shout
- herochat.autojoin.xtour
They CAN do /ch tour - and JOIN the tour chat but the AUTJOIN perms should trigger and allow them to be in it automatically to have a seamless user log in (Its insane to have everyone relog)
Any fix for this?
-
View User Profile
-
Send Message
Posted Jan 6, 2013Not working! How I create example files? HELP! S.O.S on bpermissions 2.8.1: /bp examplefiles and in the new? i don't know! Can you help me, codename_B?
-
View User Profile
-
Send Message
Posted Jan 6, 2013Hello there,
I love bpermissions, there is just 1 thing i cannot get out with the help files and the FAQ, I have multiple worlds, i mirror all the files to the worlds that i want to be used.
Now i want to have certain groups to have 1 different permissions in 1 of the worlds. When i give them the permission in that world it doesnt seem to work because of the mirror, but when i remove the mirrors the groups are gone as well as the users that used to have that group, and when a user teleports to that world he has the default permissions instead of the one he had in the main world
how can i solve this?
-
View User Profile
-
Send Message
Posted Jan 6, 2013Hey Uhm My bPerms Didnt Generate Any files except for config, mirror, and tracks.? Is that bad , also i cant setup perms O.o Now that i dont have the world folder