bPermissions
bPermissions
Welcome to bPermissions, a Superperms Manager for Bukkit! bPermissions focuses on being unique from the rest of the Permission managers. It's very simple to set up and use, it's lightning fast, fully featured, and has a great support team!
Some features:
- bPermissions has a gui client specifically designed to make running a server so easy that you'll forget that you ever used any other permissions plugin. Get it here!
- bPermissions has a unique command structure, never before seen in a permission manager. It's best used for adding lots of nodes to a user or group from the console or in-game, less typing!
- bPermissions has everything you would expect from a Permissions manager. Prefix and suffix support, inheritance, per-player permissions, multiworld support, promotion/demotion tracks, and even group priorities for multi-group setups.
- Note - bPermissions only defines prefixes and suffixes. You need a chat plugin such as bChatManager for them to show up in chat.
Commands
Say you have a user called 'Bob' and you want to put him in the group 'admin' and give him the prefix 'awesome'.
- /world yourmainworld - selects the world "yourmainworld"
- /user bob - selects the user "bob"
- /user setgroup admin - set bob's group as "admin"
- /user meta prefix awesome - set bob's prefix to "awesome"
You can do the same with groups!
- /world yourmainworld - again, selects the world
- /group admin - selects the group "admin"
- /group addgroup moderator - makes the admin group inherit from the moderator group
- /group meta prefix &c[Admin] - sets the admin prefix to "&c[Admin]"
Some other commands are as follows
- /permissions (or /bperms,/bp,/p) - general commands for bPermissions are prefixed by this
- /permissions import pex - import a pex permissions.yml in the pex folder
- /permissions reload - reloads your bPermissions files
- /permissions save - if auto-save is false, this saves your perms
- /permissions backup - backup your permissions
- /permissions helpme - for the lazy among you, this spews out some basic permissions files into your folder.
In order to use these commands, you'll need the permissions node bPermissions.admin
For configurable /promote and /demote tracks, you'll want to use permissions tracks. To read about those, visit this page
Want more commands? We have some others over on the commands page. Check 'em out!
Editing Files
bPermissions creates per world groups.yml and users.yml files in the bPermissions folder, which allow you to configure permissions on a per world basis.
Because bPermissions was designed to be configured largely via commands, bPermissions will often overwrite changes to these files especially if you /reload or restart the server.
If you've edited the files, you MUST use /permissions reload to load the modified files into the server, otherwise the permissions changes won't apply. Because a standard /reload unloads all plugins like a server stop, we cannot tell the difference between them and this will overwrite changes to your files with whatever the server last stored.
World mirroring
Worlds are mirrored like so:
world_mirroring_to: world_mirroring_from world_nether: world world_the_end: world
This duplicates the whole config for that world. Currently there's no way to have just the users or the groups mirrored, stay tuned for an update that adds this!
bPermissions and EssentialsChat
Allow me to put this issue to bed. Essentials Chat + bPermissions works for prefix and color.
This guide is for current users of EssentialsChat and want to use bPermissions along with it.
Players have colored rank prefixes and faction chat modes are also colored. All text can be colored by the players too using color codes such as &c.
bPermissions\world\groups.yml ( code snippet )
default: default groups: ## Peasant ## default: permissions: - group.default - group.userannouncer - group.userauction groups: - userannouncer - userauction meta: priority: '100' ## Citizen ## rank1: permissions: - group.default - group.rank1 groups: - default meta: priority: '200'
It has nothing configured for prefix but the group names are important (default, rank1)
Essentials\config.yml ( Code Snippet )
change-displayname: true #add-prefix-suffix: false player-commands: - chat.color - chat.format - chat.shout - chat.question chat: radius: 0 group-formats: default: '&8&lPeasant &r&8{DISPLAYNAME}&7:&r {MESSAGE}' rank1: '&8&lCitizen &r&7{DISPLAYNAME}&7:&r {MESSAGE}' moderator: '&e&l[Mod] &r&3{DISPLAYNAME}&7:&r {MESSAGE}' admin: '&c&l[Admin] &r&e{DISPLAYNAME}&7:&r {MESSAGE}'
Please direct all other Essentials support to their official support networks.
How do I get support?
First, we highly recommend you go read the FAQ page. If the answer isn't there, there's a few options of support.
- Visit the #bananacode irc channel on irc.esper.net. Just head there, as your question, and wait for someone to help you. It might be a while before you get an answer, so be patient!
- You can file a ticket. This is recommended if you don't have the time to hang around in the IRC or you have a bug report. Be prepared to check back to the ticket though, and make sure you attach your bPermissions groups and users yml files to the ticket.
- Comment on the bPermissions main page.
Note that as there's only one (slightly inactive) maintainer at the moment, any support queries may take some time.
However you choose to get support, "pls dont use txt spk," and make sure you use actual grammar.
I'm a developer!
If you wish to hook your plugin into bPermissions, please see the Developer Page for more information! If you wish to contribute code to bPermissions, fork us on GitHub!
Development builds of this project can also be downloaded from GitHub now. These builds have not been approved by the BukkitDev staff, and are possibly buggy. Use them at your own risk.
-
View User Profile
-
Send Message
Posted Jun 7, 2012Can you not simplify the changing of ranks commands? To have to type three commands is a bit extensive. I have a donation system where you can instantly get ranked to a donator rank after a donation but this can get confused if two donations were to be made at the same time I think. Maybe have the ability to set a default world for commands and then just have /user [name] setgroup [group]
If you could implement this, I'd greatly appreciate it.
-
View User Profile
-
Send Message
Posted Jun 5, 2012@Kiwz
remeber though a chat plugin is still needed. bPerms by its self does not mod chat.
-
View User Profile
-
Send Message
Posted Jun 5, 2012@bretth18 Open world/user.yml and do it like this:
notch:
permissions: []
groups:
- moderator
meta:
prefix: '&8mojang'
suffix: '&c"
http://dev.bukkit.org/paste/4544/
For the chat color, use the suffix.
-
View User Profile
-
Send Message
Posted Jun 4, 2012How do I set individual players chat text color?
-
View User Profile
-
Send Message
Posted Jun 4, 2012@codename_B
Thanks alot :D
btw, allready removed it myself.
-
View User Profile
-
Send Message
Posted Jun 4, 2012@Kiwz
Hm - you can remove it yourself by editing plugin.yml in the meantime, but alright - will do.
-
View User Profile
-
Send Message
Posted Jun 4, 2012@codename_B
I would like to suggest you to remove the alias: /ex
Since alot of other plugins use this for the /extinguish command (removes all fire)
Thanks.
-
View User Profile
-
Send Message
Posted Jun 4, 2012Nice update with the new shorthand commands B. Good job :)
-
View User Profile
-
Send Message
Posted Jun 2, 2012can someone help me with this. Whenever I start or reload the server it says "Permissions for world:world did not load correctly! Please consult server.log" Here is my groups for all my worlds: http://pastebin.com/F0srzUaz Can someone please help.
-
View User Profile
-
Send Message
Posted May 31, 2012Hmm... I cannot get a prefix to show up for the life of me... Here is a link to my groups file, look underModeratorfor what I have been testing. [EDIT]Sorry go down to Builder, either way no prefixes were showing up.
[EDITEDIT]
Nvm, got it to work :P
-
View User Profile
-
Send Message
Posted May 31, 2012After testing permissions with plugman, it tells me that no-one has permissions for bPermissions.admin, even though for me, I have it set as: - bPermissions.admin
-
View User Profile
-
Send Message
Posted May 31, 2012I love this plugin, but I have one problem...
How in the WORLD do I set it so only I have permissions to use this?
I have done:
- ^bPermissions.admin
it doesn't work.
I've done:
- ^bpermissions.admin
It doesn't work
I've done:
-^bpermissions.*
and it still doesn't work.
I have me under a group called owner, and friends under admin or mod. I want admins and mods to NOT be able to use it, but for me to be able to.
-
View User Profile
-
Send Message
Posted May 30, 2012@SLiPCoR
does that select all worlds? or the global files?
-
View User Profile
-
Send Message
Posted May 30, 2012@Mirrorsounds
try /world *
-
View User Profile
-
Send Message
Posted May 30, 2012Can you add an option to edit global files by commands? Or does this already exist?
Something like /global or /world global would be nice.
Thanks!!
-
View User Profile
-
Send Message
Posted May 29, 2012hey i need more help.... sadly... ok so im trying to make it so people can use this plugin: http://dev.bukkit.org/server-mods/simplecommandsigns/ to rank up after reading the rules at there first spawn. but i cant get it to make it so they can click on the signs without giving them the - bpermissions.admin - permission. plz help.
-
View User Profile
-
Send Message
Posted May 29, 2012@IXI_Darc_IXI
Bpermissions doesn't have any control over that. If you have Essentials installed, there's a section in the config that lets you disable it.
-
View User Profile
-
Send Message
Posted May 29, 2012I'm making a server that does not allow anyone to build. But every time someone left clicks they get spam saying "You are not permitted to build." Is there any way to disable that? Way to much spam when PvPing...
-
View User Profile
-
Send Message
Posted May 29, 2012@AirCougar Go to the world and run /world, it'll select the current world.
-
View User Profile
-
Send Message
Posted May 28, 2012any chance of this and mcmyadmin integrating?