BungeeCord Usage

Ancient Gates - BungeeCord teleportation.

This plugin can teleport any player, entity (incl. passenger) or vehicle (incl. passenger) that enters that gate to the designated location and/or execute a command. With the addition of BungeeCord, not only can this plugin teleport all of these across worlds and/or execute commands but it can teleport them across servers and execute commands on the other server.

To get started, type /gate setconf bungeeCordSupport true.

Typing /gate setconf bungeeCordSupport true is literally all you need to do.

Using BungeeCord's messaging system it gives access to the following commands:

/gate setto [id] [fromserver] - Set “to” to your location on a remote server.

/gate setbungeetype [id] [LOCATION/SERVER] - Set teleportation type on the local server.

/gate addto [id] [fromserver] - Add another "to" at your location on a remote server.

/gate remto [id] [fromserver] - Remove a "to" near your location on a remote server.

To make one of your gates go to a BungeeCord server, simply teleport to the server using the /server [toserver] command, pick a location and type /gate setto [id] [fromserver]. The only new part is that you are specifying the server the gate resides.

If you want the gate to only teleport the player to the BungeeCord server and not a specific "to" location. Use the command /gate setbungeetype [id] SERVER on any gate that you've specified a BungeeCord location for. Each time the player enters the gate they will teleport to their last location on that server.

Remember - You MUST be connected to the server through the BungeeCord proxy, otherwise these commands and teleports will NOT work.

BungeeCord Permissions

ancientgates.setto.local - access to the setto command locally.

ancientgates.setto.bungee - access to the setto command externally.

ancientgates.setbungeetype - access to the setbungeetype command.

ancientgates.addto.local - access to the addto command locally.

ancientgates.addto.bungee - access to the addto command externally.

ancientgates.remto.local - access to the remto command locally.

ancientgates.remto.bungee - access to the remto command externally.

Advanced BungeeCord Usage

For advanced users only. Recommended only for dedicated or VPS servers.
Click here for further information and full setup instructions...

Comments

_ForgeUser1223782

Join Date: 10/4/2008
Posts: 24
Member Details

#21 Posted Aug 9, 2013

Also one more bug I've come across:

When I attempt to "SETTO" from another connected bungee server, it doesn't actually set anything. If there is a player on the "FROM" server, it throws an exception and kicks them off. Still doesn't set anything. However, sometimes it DOES (which is an all around just kick in the crotch as far as finding a solid foundation for trial and error) but it sets the bungeetos server to null. I've had to set my TO for bungee portals all manually in the json db myself for the last while.

The stack:

2013-08-09 04:01:48 [WARNING] Failed to handle packet for khaos1311/74.91.126.10: java.lang.ClassCastException: org.bukkit.craftbukkit.v1_6_R2.CraftOfflinePlayer cannot be cast to org.bukkit.entity.Player
java.lang.ClassCastException: org.bukkit.craftbukkit.v1_6_R2.CraftOfflinePlayer cannot be cast to org.bukkit.entity.Player
	at org.mcteam.ancientgates.listeners.PluginMessengerListener.onPluginMessageReceived(PluginMessengerListener.java:96)
	at org.bukkit.plugin.messaging.StandardMessenger.dispatchIncomingMessage(StandardMessenger.java:424)
	at net.minecraft.server.v1_6_R2.PlayerConnection.a(PlayerConnection.java:1835)
	at net.minecraft.server.v1_6_R2.Packet250CustomPayload.handle(SourceFile:61)
	at org.spigotmc.netty.NettyNetworkManager.b(NettyNetworkManager.java:230)
	at net.minecraft.server.v1_6_R2.PlayerConnection.e(PlayerConnection.java:116)
	at net.minecraft.server.v1_6_R2.ServerConnection.b(SourceFile:37)
	at org.spigotmc.netty.NettyServerConnection.b(NettyServerConnection.java:125)
	at net.minecraft.server.v1_6_R2.MinecraftServer.t(MinecraftServer.java:592)
	at net.minecraft.server.v1_6_R2.DedicatedServer.t(DedicatedServer.java:239)
	at net.minecraft.server.v1_6_R2.MinecraftServer.s(MinecraftServer.java:481)
	at net.minecraft.server.v1_6_R2.MinecraftServer.run(MinecraftServer.java:413)
	at net.minecraft.server.v1_6_R2.ThreadServerApplication.run(SourceFile:582)

_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#22 _ForgeUser8600817

View User Profile

Send Message

Posted Aug 10, 2013
@cr0ssbreed

Fortunately I've already been invesitgating this issue with another server admin.

Can you try the latest dev build for me and report back: build.elliotcraft.net/job/AncientGates/62/

Thanks!

Rollback Post to Revision RollBack

_ForgeUser1223782

Join Date: 10/4/2008
Posts: 24
Member Details

#23 Posted Aug 15, 2013

@peewi96

Sorry for late reply, I've been quite busy lately. I just tried your build (62) to no avail. Same problem. I created a gate on Server A, set the from on Server A, went to Server B (my hub) and tried to setto gate (/gate setto gatename serverA) and it did not set it, kicked my friend off Server A and didn't save anything to the JSON database.

14:59:59 [WARNING] Failed to handle packet for khaos1311/74.91.126.10: java.lang.ClassCastException: org.bukkit.craftbukkit.v1_6_R2.CraftOfflinePlayer cannot be cast to org.bukkit.entity.Player
java.lang.ClassCastException: org.bukkit.craftbukkit.v1_6_R2.CraftOfflinePlayer cannot be cast to org.bukkit.entity.Player
        at org.mcteam.ancientgates.listeners.PluginMessengerListener.onPluginMessageReceived(PluginMessengerListener.java:217)
        at org.bukkit.plugin.messaging.StandardMessenger.dispatchIncomingMessage(StandardMessenger.java:424)
        at net.minecraft.server.v1_6_R2.PlayerConnection.a(PlayerConnection.java:1835)
        at net.minecraft.server.v1_6_R2.Packet250CustomPayload.handle(SourceFile:61)
        at org.spigotmc.netty.NettyNetworkManager.b(NettyNetworkManager.java:230)
        at net.minecraft.server.v1_6_R2.PlayerConnection.e(PlayerConnection.java:116)
        at net.minecraft.server.v1_6_R2.ServerConnection.b(SourceFile:37)
        at org.spigotmc.netty.NettyServerConnection.b(NettyServerConnection.java:125)
        at net.minecraft.server.v1_6_R2.MinecraftServer.t(MinecraftServer.java:592)
        at net.minecraft.server.v1_6_R2.DedicatedServer.t(DedicatedServer.java:239)
        at net.minecraft.server.v1_6_R2.MinecraftServer.s(MinecraftServer.java:481)
        at net.minecraft.server.v1_6_R2.MinecraftServer.run(MinecraftServer.java:413)
        at net.minecraft.server.v1_6_R2.ThreadServerApplication.run(SourceFile:582)
14:59:59 [INFO] khaos1311 left the game.

_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#24 _ForgeUser8600817

View User Profile

Send Message

Posted Aug 18, 2013
@cr0ssbreed

I have finally found the issue. Please use build #66: build.elliotcraft.net/job/AncientGates/66/

Rollback Post to Revision RollBack
_ForgeUser9433763
- Join Date: 8/19/2012
- Posts: 3
- Member Details
#25 _ForgeUser9433763

View User Profile

Send Message

Posted Sep 8, 2013
Whenever I try to do /gate setto <gate-name> <server> in my other server, nothing shows up. When I walk in the portal, the gate says: "The gate does not point anywhere :P"' Please help!!

Last edited by _ForgeUser9433763: Sep 8, 2013

Rollback Post to Revision RollBack
_ForgeUser8139462
- Join Date: 12/25/2011
- Posts: 29
- Member Details
#26 _ForgeUser8139462

View User Profile

Send Message

Posted Sep 10, 2013
How can I have the Server player count be shown on the gates? is that another plugin?

Rollback Post to Revision RollBack
_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#27 _ForgeUser8600817

View User Profile

Send Message

Posted Sep 18, 2013
@MegaZoroark16

Use the build in the link below.

@GrumpleStache

I believe there is a Bungee TpSigns plugin on the spigotmc.org website somewhere for that =)

Rollback Post to Revision RollBack
_ForgeUser6862068
- Join Date: 5/21/2011
- Posts: 2
- Member Details
#28 _ForgeUser6862068

View User Profile

Send Message

Posted Sep 29, 2013
When i try to set up the /gate setto, it comes up with the error that the server is still trying to connect to BungeeCord. I have no idea what i should do because the server has been up constantly for several days and still shows the same error. Any suggestions?

Rollback Post to Revision RollBack
_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#29 _ForgeUser8600817

View User Profile

Send Message

Posted Sep 30, 2013
@sepsep96

This would suggest that you are either:

a) Connecting to the server directly and not through BungeeCord, or

b) Using an older version of BungeeCord

I would also suggest using the latest development build if using this plugin with BungeeCord. Click the development builds link on the main project page.

Rollback Post to Revision RollBack

_ForgeUser4387452

Join Date: 5/3/2010
Posts: 78
Member Details

#30 Posted Oct 25, 2013

Hiho

Can you explain the error?
I've installed the plugin and it works fine for 11h ^{but now:}

16:39:15 [INFO] IrusVirus issued server command: /gate
16:39:15 [SEVERE] null
org.bukkit.command.CommandException: Unhandled exception executing command 'gate' in plugin AncientGates v1.7.2
        at org.bukkit.command.PluginCommand.execute(PluginCommand.java:46)
        at org.bukkit.command.SimpleCommandMap.dispatch(SimpleCommandMap.java:192)
        at org.bukkit.craftbukkit.v1_6_R3.CraftServer.dispatchCommand(CraftServer.java:527)
        at net.minecraft.server.v1_6_R3.PlayerConnection.handleCommand(PlayerConnection.java:976)
        at net.minecraft.server.v1_6_R3.PlayerConnection.chat(PlayerConnection.java:887)
        at net.minecraft.server.v1_6_R3.PlayerConnection.a(PlayerConnection.java:834)
        at net.minecraft.server.v1_6_R3.Packet3Chat.handle(SourceFile:49)
        at org.spigotmc.netty.NettyNetworkManager.b(NettyNetworkManager.java:230)
        at net.minecraft.server.v1_6_R3.PlayerConnection.e(PlayerConnection.java:116)
        at net.minecraft.server.v1_6_R3.ServerConnection.b(SourceFile:37)
        at org.spigotmc.netty.NettyServerConnection.b(NettyServerConnection.java:132)
        at net.minecraft.server.v1_6_R3.MinecraftServer.t(MinecraftServer.java:594)
        at net.minecraft.server.v1_6_R3.DedicatedServer.t(DedicatedServer.java:240)
        at net.minecraft.server.v1_6_R3.MinecraftServer.s(MinecraftServer.java:483)
        at net.minecraft.server.v1_6_R3.MinecraftServer.run(MinecraftServer.java:415)
        at net.minecraft.server.v1_6_R3.ThreadServerApplication.run(SourceFile:583)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
        at java.util.ArrayList.rangeCheck(Unknown Source)
        at java.util.ArrayList.get(Unknown Source)
        at org.mcteam.ancientgates.Plugin.handleCommand(Plugin.java:322)
        at org.mcteam.ancientgates.Plugin.onCommand(Plugin.java:316)
        at org.bukkit.command.PluginCommand.execute(PluginCommand.java:44)
        ... 15 more

_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#31 _ForgeUser8600817

View User Profile

Send Message

Posted Oct 31, 2013
@IrusVirus

Can you PM me a pastebin.com of you gates.json file?

Rollback Post to Revision RollBack
_ForgeUser11631094
- Join Date: 6/8/2013
- Posts: 71
- Member Details
#32 _ForgeUser11631094

View User Profile

Send Message

Posted Nov 16, 2013
hi i got a problem i did set it up correctly but nothing happens when i walk in. here is the code http://pastebin.com/7h3H1QNT

Rollback Post to Revision RollBack
_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#33 _ForgeUser8600817

View User Profile

Send Message

Posted Nov 19, 2013
@AnAwesomeGuy

Could you try the latest development build first (look for the development builds link on the project overview page), and let me known if this resolves the issue.

If not, then send me your gates.json file.

Thanks =)

Rollback Post to Revision RollBack
_ForgeUser10900374
- Join Date: 4/4/2013
- Posts: 81
- Member Details
#34 _ForgeUser10900374

View User Profile

Send Message

Posted Nov 21, 2013
A question.

I wish to have "BungeeCord gate to only teleport the player to the server" do i then need the plugin on target server also?

Think it shouldent be needed when the portal only should act like "/server [name]" command.

Rollback Post to Revision RollBack
_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#35 _ForgeUser8600817

View User Profile

Send Message

Posted Nov 22, 2013
@bratpitt

Yes, the plugin is still required on the target server.

The reason for this is that Ancient Gates sends additional information to the target server before the player is teleported so as to handle incoming teleports efficiently.

Rollback Post to Revision RollBack
_ForgeUser10900374
- Join Date: 4/4/2013
- Posts: 81
- Member Details
#36 _ForgeUser10900374

View User Profile

Send Message

Posted Nov 22, 2013
@peewi96

Am missing something, still geting "... only use this command on a BungeeCord gate"

is socket communication also needed?

Rollback Post to Revision RollBack
_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#37 _ForgeUser8600817

View User Profile

Send Message

Posted Nov 22, 2013
@bratpitt

No it's not needed.

What you need to do is go to the server you want to teleport to and type:
"/gate setto [id] [server the gate is on]"

Then go back to the server the gate is on and type:
"/gate setbungeetype [id] server"

It's a bit cumbersome at the moment. I will be changing this for AncientGates v1.8 to make it more intuitive.

Rollback Post to Revision RollBack
_ForgeUser10900374
- Join Date: 4/4/2013
- Posts: 81
- Member Details
#38 _ForgeUser10900374

View User Profile

Send Message

Posted Nov 23, 2013
@peewi96

Thanks. Now it works :)

Litle donation on its way, as everyone should do when asking for support on good plug-in and gets it!

Rollback Post to Revision RollBack
_ForgeUser12507452
- Join Date: 10/27/2013
- Posts: 5
- Member Details
#39 _ForgeUser12507452

View User Profile

Send Message

Posted Dec 3, 2013
For some odd reason I can do /gate addserver in one server but not the other...

Any input on this? I put on the correct options in config, reloaded server, or is it just a plugin conflict?

Help is greatly appreciated (and greatly needed)

Rollback Post to Revision RollBack
_ForgeUser8600817
- Join Date: 3/18/2012
- Posts: 253
- Member Details
#40 _ForgeUser8600817

View User Profile

Send Message

Posted Dec 9, 2013
@AirbusAi342

If you're using Advanced BungeeCord usage, you need to ensure that both "bungeeCordSupport" and "useSocketComms" are both set to true. If there are any errors starting up the socket comms port (check the server.log on startup), then AncientGates will disable socket comms and thus the "/gate addserver" command.

If you're really stuck, yet willing to give me access to your configuration settings, etc. Then drop me a PM and I'll help you get set up (so long as you have BungeeCord up and running).

Rollback Post to Revision RollBack
To post a comment, please login or register a new account.

Ancient Gates

Bukkit Plugins

Pages