ColorMatch
ColorMatch
Another nice minigame!
You get a colored wool in your Inventory and you have to jump onto the corresponding color! Multiple arenas can be set up that are joinable via signs/commands. As of now the last man standing wins, which can't be changed. See further information and configuration options down below.
Setup
Pex doesn't care about OP, you need to give yourself the permissions!
- Set the main lobby where all join signs will be: /cm setmainlobby
For each new arena:
- /cm createarena [name]
- Set the waiting lobby (different than the main lobby!): /cm setlobby [name]
- Setup the minigame (will create a 64x64 area full with wool, be aware of that!): /cm setup [name]
To create a join sign:
1st line: colormatch; 3rd line: arenaname
Creating a join sign requires the permission cm.sign or colormatch.sign.

Smaller Arenas
As of v1.5 you can also create smaller arenas. The setup is the same except for one command, /cm setup is now /cm setupsmall. It will create an 32x32 arena and not the default 64x64 arena, which is good for small servers with less ram.
Glass/Clay mode
As of v1.5.3 you can also create glass arenas. The setup is the same except for one command, /cm setup is now /cm setupglass. This will generate a normal arena but with stained glass in different colors. As of v1.5.5 clay arenas are possible, too.
Commands/Permissions
| Command | Description | Permission |
|---|---|---|
| /cm createarena [name] | creates a new arena | colormatch.setup |
| /cm setlobby [name] | sets the waiting lobby for a new arena | colormatch.setup |
| /cm setup [name] | sets the new arena up | colormatch.setup |
| /cm setupsmall [name] | sets the new arena up (32x32 mode) | colormatch.setup |
| /cm setupsmallclay [name] | sets the new arena up (32x32 clay mode) | colormatch.setup |
| /cm setupglass [name] | sets the new arena up (glass mode) | colormatch.setup |
| /cm setupsmallglass [name] | sets the new arena up (32x32 glass mode) | colormatch.setup |
| /cm setupclay [name] | sets the new arena up (clay mode) | colormatch.setup |
| /cm setmainlobby | sets the main lobby | colormatch.setup |
| /cm removearena [name] | removes a arena | colormatch.setup |
| /cm join [name] | joins a game per command | |
| /cm leave | leaves the game | |
| /cm kitgui | shows all kits in a gui | |
| /cm changekit [kit] | changes the kit and lists all, if unknown kit provided | |
| /cm start [name] | forces an arena to start | colormatch.start |
| /cm reload | reloads the config | colormatch.reload |
| /cm list | lists all arenas | colormatch.list |
| /cm endall | ends all running colormatch tasks, if something bad happens | colormatch.end |
| /cm setdifficulty [arena] [difficulty] | sets the difficulty of an arena | colormatch.setup |
| /cm setmaxplayers [arena] [count] | sets max players of an arena | colormatch.setup |
| /cm setminplayers [arena] [count] | sets min players of an arena | colormatch.setup |
Creating a join sign requires the permission cm.sign or colormatch.sign.
Config
config: auto_updating: true # I recommend you to set that to true for bugfix releases etc. rounds_per_game: 10 # how many times the color will change per game start_countdown: 5 # seconds to wait before starting a game default_max_players: 4 # max amount of players that can join and will be used as a default default_min_players: 3 # amount of players required to start a game and min amount of players that will be used as a default use_economy_reward: true # if set to true, the winner get the money reward, if false, the item reward money_reward_per_game: 30 itemid: 264 itemamount: 1 use_command_reward: false # will execute the following command as a reward, if set to true command_reward: pex user [user] group set ColorPro start_anouncement: true # enables server broadcasts game_on_join: false # autostart (for bungee servers) bling_sounds: false # turn this on if you want to get 3 blings played before the wool disappears kits: default: name: default potioneffect: SPEED amplifier: 1 lore: The default class. strings: saved: arena: '&aSuccessfully saved arena.' lobby: '&aSuccessfully saved lobby.' setup: '&6Successfully saved spawn. Now setting up, might &2lag&6 a little bit.' not_in_arena: '&cYou don''t seem to be in an arena right now.' config_reloaded: '&6Successfully reloaded config.' arena_is_ingame: '&cThe arena appears to be ingame.' arena_invalid: '&cThe arena appears to be invalid.' arena_invalid_sign: '&cThe arena appears to be invalid, because a join sign is missing.' arena_invalid_component: '&2The arena appears to be invalid (missing components or misstyped arena)!' you_fell: '&3You fell! Type &6/cm leave &3to leave.' you_won: '&aYou won this round, awesome man! Here, enjoy your reward.' starting_in: '&aStarting in &6' starting_in2: '&a seconds.' arena_full: '&cThis arena is full!' starting_anouncement: '&aStarting a new ColorMatch Game in &6' started_anouncement: '&aA new ColorMatch Round has started!'
Kits
Every kit besides the default one requires a permission, colormatch.kit.[kitname]. You can select a kit ingame by typing /cm changekit [name].
You can also add unlimited kits, but be aware that errors might appear, if the potioneffect is not valid. You can find a list of Potioneffects here.
default: name: default potioneffect: SPEED amplifier: 1 lore: The default class.
Arena Difficulty
You can set the difficulty for each arena as of v1.4. Simply do /cm setdifficulty [arenaname] [difficulty] to change it.
Possible difficulties are:
| Difficulty | Description |
|---|---|
| 0 | Easy |
| 1 | Default |
| 2 | Hard |
The Logarithm:
On each round, the following time is calculated for the next round. d is the difficulty, which can be 0, 1 or 2. 80L can be seen as 4 seconds (20L = 1 second). You can use the following function to determine the seconds in ticks for a round, if you're a big mathematician:
f(x) = 80 - (d * 20) - (4 * x)
Preview

Youtube
Thanks to Wukkit for creating this video like 3 hours after the first release! (a bit outdated as of now)
German tutorial video:
Other reviews:
[GERMAN] My german plugin tutorial: link.
[GERMAN] Another nice german review: link.
[SPANISH] Here's a spanish review for the plugin: link.
[ENGLISH] Another english quick tutorial: link.
[ENGLISH] Plugin review: link.
[POLISH] Plugin review: link.
[GAMEPLAY] Here's a quick gameplay video on Kamoworld by Cam: link.
[PORTUEGESE] Here's a nice portuguese tutorial + gameplay video: link
[ITAILIAN] link
Todo
- add auto-rejoin
- add leaderboards
- add bungee signs support
Additional Information
You can find the source code here.
You can try this plugin out at server.kamoworld.com. ColorMatch is also included in MinigamesParty.
This plugin uses hidendra's Metrics system to send server related information like player count, java/bukkit/plugin version etc. to the official MCStats servers. You can disable this in the config.yml in plugins/PluginMetrics/.
The plugin also uses an autoupdater which can be turned off in the config (see above in the config section).
Have fun :)

-
View User Profile
-
Send Message
Posted Jan 3, 2014When i will join a arena: An internal error occurred while attempting to perform this command
-
View User Profile
-
Send Message
Posted Jan 3, 2014@tgndev
No Need to doubt me.. lol.. He is an Admin on the server.. The Sign was wrote before InstanceLabs asked if it was ok to release the plugin. So when i get a chance i will update the sign's :)
-
View User Profile
-
Send Message
Posted Jan 3, 2014@tgndev
When I released the Minigames Party project where ColorMatch is included, kayc01 asked to make ColorMatch a standalone plugin. It was intended to stay private first, but well, I released it now too, as it's already included in MinigamesParty. Not custom anymore, that's true :P
-
View User Profile
-
Send Message
Posted Jan 3, 2014Instancelabs, is that right you are the admin of kayc01 server? On he's server, he wrote this is a custom plugin made by our admins. CUSTOM PLUGIN? Wow.
-
View User Profile
-
Send Message
Posted Jan 3, 2014Guys this is on my server: IP: 76.72.163.50:29998
I requested it to be a Standalone plugin (It was a part of the Party Plugin)
Its in the Arcade Section. Some of the Plugin's Standalone features were requested by me! It is a little laggy but is lots of fun :)
-
View User Profile
-
Send Message
Posted Jan 3, 2014@xXrobin99Xx
Sure I can do that, it will take some time and i'll release a stable version here first. Added to todo list :)
-
View User Profile
-
Send Message
Posted Jan 2, 2014Can you add BungeeCord Support?
-
View User Profile
-
Send Message
Posted Jan 2, 2014Link pls !!!